Matte-black 40-yard roll-off dumpster staged on a framed-out residential construction site in Rochester, framing lumber stacked nearby, hooklift delivery truck visible in the background under bright Colorado daylight

Construction dumpster rental in Rochester

What size roll-off do you need for a Rochester jobsite? A 30-yard container handles a kitchen tear-out, full bathroom demo, or roofing tear-off; swap-out included.

Jobsite Roll-off Containers for General Contractors

Our fleet of 20-, 30-, and 40-yard containers serves jobsites across Rochester and Monroe. These heavy-duty units feature reinforced steel sidewalls, walk-in rear swing doors, and steel bottom rollers for easy loading by framers, roofers, and demo crews. We set every roll-off on protective driveway boards. Contact us for contractor pricing and tonnage rates regarding recurring service for multi-phase projects.

Matte-black 20-yard roll-off construction dumpster with heavy ribbed steel sidewalls and swing rear doors at a working jobsite in Rochester, sitting directly on compacted dirt with an unmarked white hauler partially visible at the far edge of the frame.

20-yard construction roll-off

The 20-yard roll-off measures 20 feet long by 7 feet wide and stands 4 feet tall, with about 2 tons of debris included.

This 20-yard roll-off fits kitchen and bath remodels, single-room demo, and small framing jobs in tight spaces.

Matte-black 30-yard roll-off construction dumpster sitting directly on the compacted-dirt site of a framed single-family home build in Rochester, drywall and lumber scrap loaded inside.

30-yard construction roll-off

The 30-yard roll-off runs 22 feet long, 8 feet wide, and 6 feet tall, with about 4 tons of capacity included.

This size fits whole-house remodels, additions, and new-build framing while the high walls handle bulky drywall and lumber.

Matte-black 40-yard roll-off construction dumpster being lowered from a white-cab hooklift delivery truck onto the compacted-dirt jobsite at a commercial build site in Rochester

40-yard construction roll-off

The 40-Yard Roll-Off measures 22 ft x 8 ft x 8 ft, holding roughly 5 tons of debris.

Sized for commercial builds and large tear-outs, the 40-yard roll-off is the largest container staged on Rochester sites.

Construction Debris, Drywall, Lumber Acceptance

Our construction roll-off containers accept the full range of mixed C&D debris: framing lumber, drywall, plaster, subfloor, insulation, packaging, pallets, and light metals. These loads are sorted at the Rochester transfer station to maximize recovery — contractors often utilize our commercial recurring hauling agreements for efficiency. For specific material stream standards, check the EPA construction debris recycling guidance to ensure proper site management.

  • Framing lumber and offcuts
  • Drywall, plaster, lath
  • Subfloor and sheathing
  • Insulation and vapor barrier
  • Mixed packaging and pallets
  • Light metals and conduit
Worker in a yellow high-visibility vest tossing framing lumber and broken drywall into a matte-black 30-yard construction roll-off dumpster on an active build site in Rochester, bright daylight
Low-profile matte-black lowboy roll-off dumpster loaded with broken concrete slab and rebar at a foundation tear-out in Rochester, skid steer parked beside it, sunny Colorado morning

Concrete, Brick, and Asphalt Heavy-debris Pricing

Dense materials need the right container. Our reinforced-steel lowboy roll-offs are built for concrete slab tear-out, brick demo, asphalt millings, and clean dirt loads up to 10,000 pounds. The low 2-to-3-foot side walls let skid steers and wheelbarrows load over the rim without breaking USDOT truck weight limits on Rochester routes.

Heavy-debris jobs run on weight tickets from the scale house, not on the yard; the cleanest loads — with no mixed wood, drywall, or trash — earn the lowest per-ton rate. I size the container and dispatch your dumpster based on a quick call with the site super to verify your total tonnage.

Tonnage Limits and Weight Overage Policy

Every construction roll-off comes with an included tonnage allowance; any extra weight is billed at the per-ton overage rate against the scale-house ticket. Your upfront quote lists the cap by container size: this prevents surprises when the truck weighs in—which is why we reserve roofing tear-off jobsite containers for shingles, as their density should not consume your standard mixed-debris allowance. Call (585) 632-1628.

20-yard

3 tons

Included tonnage. Mixed C&D debris.

30-yard

4 tons

Included tonnage. Mixed C&D debris.

40-yard

5 tons

Included tonnage. Mixed C&D debris.

On-site Swap-out and Dispatch Coordination

Multi-week jobs run on a swap rhythm, not single drops; tell dispatch when a container is full — we’ll roll a fresh roll-off to the same staging pad the same or next business day across the Rochester metro and Monroe.

Step 1

Text dispatch when full

Site supers text a photo and the container number to the dispatcher — no portal logins, no ticketing.

Step 2

Same- or next-day swap

We haul the container straight onto the staging pad and drop an empty in the same spot so the next load never waits on paperwork.

Step 3

Weekend dispatch available

Saturday pulls keep Monday starts clean; coordinate Friday afternoon for a smooth pickup.

Insurance and Contractor Account Setup

We issue certificates of insurance to the GC or owner; we run net-30 contractor accounts with consolidated monthly billing for active sites in Rochester — the hooklift fleet stages the recurring containers. The dispatcher sets up the account in a single phone call.